Lenovo ThinkSystem D2 Manual page 173

User Action:
Information only; no action is required.
• FQXSFMA0008M: DIMM [arg1] has failed the POST memory test. [arg2]
Severity: Error
User Action:
Complete the following steps:
1. If the DIMM configuration was changed prior to this failure verify that the DIMMs are installed in the
correct population sequence.
2. RESEAT the DIMM that failed POST memory test and the DIMMs on adjacent slots if populated. Boot
to F1 setup and enable the DIMM. Reboot the system.
3. If the DIMMs have been upgraded just prior to the issue than update uEFI to the latest version.
4. If the problem persists, collect Service Data logs.
5. Contact Lenovo Support.
• FQXSFMA0009I: Invalid memory configuration for Mirror Mode has been recovered. [arg1]
Severity: Info
User Action:
Information only; no action is required.
• FQXSFMA0009K: Invalid memory configuration for Mirror Mode. Please correct memory
configuration. [arg1]
Severity: Error
User Action:
Complete the following steps:
1. Ensure that all the DIMMs are enabled and functional by booting to F1 Setup or in XCC web .If any
DIMMs are non-functional adddress that first.
2. Make sure that the DIMM connectors are correctly populated for mirroring mode, according to the
service information for this product.
3. If the problem persists, collect Service Data logs.
4. Contact Lenovo Support.
• FQXSFMA0010I: Invalid memory configuration for Sparing Mode has been recovered. [arg1]
Severity: Info
User Action:
Information only; no action is required.
• FQXSFMA0010K: Invalid memory configuration for Sparing Mode. Please correct memory
configuration. [arg1]
Severity: Error
User Action:
Complete the following steps:
1. Ensure that all the DIMMs are enabled and functional by booting to F1 Setup or in XCC web .If any
DIMMs are non-functional adddress that first.
. 169
Chapter 4 UEFI events