Lenovo ThinkSystem D2 Manual page 180

Enclosure, modular enclosure, modular enclosure for 6u configuration and thinksystem sd530 compute node messages and codes reference
Hide thumbs Also See for ThinkSystem D2:
Table of Contents

Advertisement

• FQXSFMA0037G: Intel Optane DCPMM interleave set (DIMM [arg1]) is migrated from another
system (Platform ID: [arg2]), these migrated DCPMMs are not supported nor warranted in this
system.
Severity: Warning
User Action:
Complete the following steps:
1. Check the system specification.
2. Move the DCPMM back to the original machine or same machine type platform, or backup the
persistent region data and delete namespace, disable security, security erase, follow DCPMM guide
to create new goal if the target installed system support DCPMM.
3. If the problem persists, collect Service Data logs.
4. Contact Lenovo Support.
• FQXSFMA0038K: All Intel Optane DCPMMs could not be auto unlocked because of no passphrase.
Severity: Warning
User Action:
Complete the following steps:
1. Provision the passphrase for Intel Optane DCPMM auto unlock or unlock DCPMMs in OS with Intel
DCPMM tools.
2. Methods to provision the passphrase:
a. -Option 1. enable security on all Intel Optane DCPMMs found through System Setup with Scope
of "Platform" under the (System Settings > Intel Optane DCPMMs > Security).
b. -Option 2. enable security on all Intel Optane DCPMMs found through OneCLI command
(OneCLI.exe config set IntelOptaneDCPMM.SecurityOperation "Enable Security") and (OneCLI.
exe config set IntelOptaneDCPMM.SecurityPassphrase "the user passphrase").
Note: If the security state is mixed, then disable security for those DCPMMs in System Setup by
selecting the scope of "Single DCPMM" under the (System Settings > Intel Optane DCPMMs >
Security) firstly before take the action to provision the passphrase. If DCPMMs are not unlocked,
system will not see or access the persistent region of DCPMMs.
• FQXSFMA0039K: One or more Intel Optane DCPMMs could not be auto unlocked because of
invalid passphrase.
Severity: Warning
User Action:
Complete the following steps:
1. Use OneCLI to check which DCPMM is failed for unlock. Using different passphrases could caused
auto unlock failure.
2. Use UEFI setup page or Intel DCPMM OS tool to unlock the related DCPMM with right passphrase.
3. in order to avoid this auto unlock failure in next boot, change the passphrase of these DCPMMs in
System Setup utility with the scope of "Single DCPMM" under the (System Settings > Intel Optane
DCPMMs > Security).
Note: If DCPMMs are not unlocked, system will not see or access the persistent region of DCPMMs.
4. If the issue is not resolved then contact Lenovo Support.
• FQXSFMA0040K: Invalid Intel Optane DCPMM configuration detected. Please verify DCPMM
configuration is valid.
176
ThinkSystem D2 Enclosure, Modular Enclosure, Modular Enclosure for 6U Configuration and ThinkSystem SD530 Compute
Node Messages and Codes Reference

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7x207x217x22

Table of Contents