Installing The System Cover - Dell EMC PowerEdge R940 Installation And Service Manual
Hide thumbs
Also See for EMC PowerEdge R940:
- Installation and service manual (161 pages) ,
- Technical manual (51 pages) ,
- Service (14 pages)
Table of Contents
Advertisement
Figure 22. Removing the system cover
Next steps
Installing the system
cover.
Installing the system cover
Prerequisites
1. Follow the safety guidelines listed in
2. Ensure that all internal cables are routed correctly and connected, and no tools or extra parts are left inside the system.
Steps
1. Align the tabs on the system cover with the guide slots on the system.
2. Push the system cover latch down.
The system cover slides forward, the tabs on the system cover engage with the guide slots on the system and the system
cover latch locks into place.
3. Using a 1/4 inch flat head or Phillips #2 screwdriver, rotate the latch release lock clockwise to the locked position.
Safety instructions
on page 29.
Installing and removing system components
33
Advertisement
Table of Contents
