Dell EMC PowerEdge R940 Installation And Service Manual page 12

Table 5. Status LED indicators and descriptions (continued)
Icon
System health and system ID indicator codes
The system health and system ID indicator is located on the left control panel of your system.
Figure 5. System health and system ID indicators
Table 6. System health and system ID indicator codes
System health and system ID indicator code
Solid blue
Blinking blue
Solid amber
Blinking amber
iDRAC Quick Sync 2 indicator codes
iDRAC Quick Sync 2 module (optional) is located on the left control panel of your system.
Figure 6. iDRAC Quick Sync 2 indicators
Table 7. iDRAC Quick Sync 2 indicators and descriptions
iDRAC Quick Sync 2 indicator code
Off (default state)
12 PowerEdge R940 overview
Description
PCIe indicator
Condition
Indicates that the iDRAC Quick Sync 2
feature is turned off. Press the iDRAC
Quick Sync 2 button to turn on the
iDRAC Quick Sync 2 feature.
Condition
The indicator turns solid
amber if a PCIe card
experiences an error.
Condition
Indicates that the system is turned on, system is healthy, and
system ID mode is not active. Press the system health and
system ID button to switch to system ID mode.
Indicates that the system ID mode is active. Press the system
health and system ID button to switch to system health mode.
Indicates that the system is in fail-safe mode. If the problem
persists, see the Getting help section.
Indicates that the system is experiencing a fault. Check the
System Event Log or the LCD panel, if available on the bezel,
for specific error messages. For information about the event and
error messages generated by the system firmware and agents
that monitor system components, go to
Error Code, type the error code, and then click Look it up..
Corrective action
If the LED fails to turn on, reseat the
left control panel flex cable and check.
If the problem persists, see the
help
Corrective action
If the problem persists, see
Getting help.
Restart the system. Update
any required drivers for the
PCIe card. Reinstall the card.
If the problem persists, see
Getting help.
qrl.dell.com > Look Up >
section.
Getting