Back View Of The System - Dell EMC PowerEdge R940 Installation And Service Manual

Table 8. Right control panel (continued)
Item Button or port
3 USB ports
4 VGA port
iDRAC Direct LED indicator codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC
subsystem.
You can configure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or tablet.
The following table describes iDRAC Direct activity when the iDRAC Direct port is active:
Table 9. iDRAC Direct LED indicator codes
iDRAC Direct LED
indicator code
Solid green for two
seconds
Flashing green (on for
two seconds and off for
two seconds)
Turns off

Back view of the system

You can access the following components from the back of the system:
Figure 8. Back view features
14 PowerEdge R940 overview
Icon
Condition
Indicates that the laptop or tablet is connected.
Indicates that the laptop or tablet connected is recognized.
Indicates that the laptop or tablet is unplugged.
Description
information, see the Integrated Dell Remote Access Controller
User's Guide at www.dell.com/poweredgemanuals.
The USB ports are 9-pin, USB 3.0-compliant. These ports
enable you to connect USB devices to the system.
Enables you to connect a display device to the system. For more
information, see the Technical specifications section.