Read First - ABB MINI-MAG 10D1475 Instruction Manual

10D1475 MINI-MAG MAGNETIC FLOWMETER INSTRUCTION BULLETIN

READ FIRST

Do not install, maintain, or operate this equipment without reading,
understanding and following the proper Bailey-Fischer & Porter
instructions and manuals, otherwise injury or damage may result.
All Flowmeters and/or Signal Converters being returned to
Bailey-Fischer & Porter for repair must be free of any hazardous
materials (acids, alkalis, solvents, etc). A Material Safety Data Sheet
(MSDS) for all process liquids must accompany returned equipment.
Contact Bailey-Fischer & Porter for authorization prior to returning
This product is painted with a high performance epoxy paint. The
corrosion protection provided by this finish is only effective if the finish
is unbroken. It is the users' responsibility to "touch-up" any damage
that has occurred to the finish during shipping or installation of the
product. Special attention must be given to: meter flange bolting, pipe
mounting of electronics, conduit entries and covers that are removed to
facilitate installation or repair. For continued corrosion protection
throughout the product life, it is the users' responsibility to maintain the
product finish. Incidental scratches and other finish damage must be
repaired and promptly re-painted with approved touch-up paint. Provide
the model number and size of your product to the nearest Bailey-Fischer
& Porter representative to obtain the correct touch-up paint.
The NEMA 4X rating applies to the meter body and electronics enclosure only. The following
accessories (if supplied) may not meet NEMA 4X unless specifically ordered as NEMA 4X:
• meter installation hardware: studs, nuts, bolts
• enclosure mounting hardware for pipe or wall mounting
• conduit hardware
V
WARNING
INSTRUCTION MANUALS
RETURN OF EQUIPMENT
equipment.
NEMA 4X, Corrosion Resistant Finish
Read these instructions before starting installation;
save these instructions for future reference.