Table of Contents
Advertisement
Polling Setup File
1. Choose Polling Setup File from the Communications menu to define the reports to be
taken when polling is initiated. You can set up reports for 6 polling sessions.
2. Click one of the Session# options buttons to display the reports for the session.
3. Find the report you wish to edit, if necessary use the scroll bar on the right. Then find the
type of report (X1, Z2, etc.), if necessary use the scroll bar on the bottom. When you
have located the field for the specific report you wish to edit, open the list box by
clicking on the appropriate arrow.
Select Print from the list box if you wish to print the report at the ECR when polling;
select the check box under No Print if you do not wish to print the report at the ECR
when polling. Select the blank position if you wish to remove a report from the session.
4. If necessary, click another one of the Session# options buttons to display the reports for
the session.
5. Repeat step 3 for each session you are setting up.
6. Click Exit to save changes and return to the main menu.
74 Menu Functions
SAM1000 For Windows User's Manual v2.3
Advertisement
Table of Contents
