Converting The Bit Map Image For The Sps-1000; Prepare Downloading The Bit Map Image On The Sps-1000; Downloading The Bit Map Image To The Sps-1000 With Sam1000; Downloading The Bit Map Image To The Sps-1000 With The Samsung Utility - Samsung SAM4S ECR SPS-1000 User Manual

Converting the Bit Map Image for the SPS-1000

1. Run CONV_BMP.EXE.
2. Enter the filename without extension (.bmp).
3. Output filename is the same and extension is DAT.

Prepare Downloading the Bit Map Image on the SPS-1000

1. In the S-Mode MEMORY ALLOCATION, set to Y the STORE BITMAP item.
2. In the S-Mode SERIAL PORT DEVICE SELECTION, set the port where PC is
connected to POLLING.
Downloading the Bit Map Image to the SPS-1000 with
SAM1000
1. Rename the converted DAT file to <storename>.bmi
2. Place the file in the appropriate store directory.
3. Send the BIT MAP LOGO from the SEND TO ECR screen.
Downloading the Bit Map Image to the SPS-1000 with the
Samsung Utility
1. Place the file in the same directory as the program "spsdown.exe".
2. Execute the spsdown.exe program with the following switches: spsdown <INFO>
<INFO> Switchs
Sxxxxxx
Rxx
Cx
port2.
Nfilename
Example #1: to send the BITMAP to STORE #000000, REGISTER#1 PORT on PC is
COM1 and converted file is DQ.DAT the command would be :
Example #2: to send the BITMAP to STORE #0000127, REGISTER#2 PORT on PC is
COM2 and converted file is DQ.DAT the command would be :
C2 NDQ.DAT
SAM1000 For Windows User's Manual v2.3
: Where xxxxxx is a STORE #. Default is 000000.
: Where xx is a REGISTER #. Default is 1.
: Where x is a com port no. 1 for port1 and 2 for
Default is port1.
: Where filename is the BITMAP filename to download.
spsdown NDQ.DAT
spsdown S000127 R02
Appendices  111