Table of Contents
Advertisement
Time Periods
Memory allocation determines whether there are 24, 48, or 96 time periods. Time periods
will default to hourly periods if 24 periods are selected in memory allocation; 30 minute
periods if 48 periods are selected; 15 minute periods if 96 periods are selected.
Periods can be set to custom lengths using this program. If fewer periods are needed than are
available, unneeded periods can be inactivated so that they will not appear on reports. To
inactivate a period, replace "active" for the period with an "inactive".
All time units are based upon a 24 hour clock (military time).
1. Choose the Edit ECR Data menu, then select P-Mode Programming menu to open the
P-Mode Programming menu. Select Time Periods to display the Time Period Program
screen for the selected store file.
2. Use the scroll box at the right of the screen to find the time period you wish to program.
3. Edit times as necessary by double clicking on a field, then typing a new time.
4. Select Active or Inactive from the drop down box to determine if the period is used.
5. Click Exit to save changes.
SAM1000 For Windows User's Manual v2.3
Menu Functions 41
Advertisement
Table of Contents
