Toro Groundsmaster 4000 Operator's Manual page 7

114-0846
1. Read the Operator's Manual for information on starting the
engine—1) Set to neutral; 2) Engage the brake; 3) Set the
engine speed to slow; 4) Turn the key to preheat; 5) Turn
the key to start the engine.
2. Read the Operator's Manual for information on shutting off
the engine—1) Set the engine speed to slow; 2) Disengage
the deck; 3) Lock the parking brake; 4) Wait 5 minutes; 5)
Turn the key to shut off the engine; 6) Remove the key
from the switch.
3. Read the Operator's Manual.
4. Pull the knob out to engage the PTO.
5. Push the knob in to disengage the PTO.
6. Raise the decks to go to H range.
1. Warning—read the Operator's Manual.
2. Warning—do not operate this machine unless you are trained.
3. Warning—wear the seat belt when seated in the operator's position.
4. Warning—wear hearing protection.
5. Thrown object hazard—keep bystanders a safe distance from the machine.
6. Cutting hazard of hand or foot—stay away from moving parts; keep all guards in place.
7. Tipping hazard—lower the cutting unit when driving down slopes; slow machine before turning, do not turn at high speeds
8. Warning—lock the parking brake, shut off the engine, and remove the key from the ignition before leaving the machine.
decal114-0846
1. Warning—1) Disengage
the PTO; 2) Raise the deck
2. Do not place your foot
here.
3. Direction pedal
117-2754
7
114-0849
4. Forward direction
5. Reverse direction
decal114-0849
decal117-2754