Tool Air Piping - Toshiba TH850A Instruction Manual

4.2

Tool Air Piping

The robot is provided with three (3) air lines for the tool.
The outer diameter of the air pipelines is 6 mm. Fig. 4.4 shows the tool air piping.
The air control unit (oiler, regulator with gage and filter) and solenoid valves should be
provided by the user.
3xM5 hand air joint
L type quick-
operated joint
3xø6 air tube
The air tube is identified by the number and color. At piping, make sure that each
tube is connected properly, referring to the below-mentioned.
1 : Red 2 : White 3 : Blue
DUST- & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
Wiring panel
Quick-operated joint
– 35 –
Details of wiring panel
3
2
1
3xø6 quick-operated joint for hand
1
Details
2
3
STE 80765