•
When lifting up the robot by workers, hold the shaded locations by hands, as
shown in Fig. 2.3. If the ball screw spline shaft is held by hands, an
unusually large force is exerted, resulting in a malfunction.
•
If the bellows is held or gripped by hands, it may be broken due to friction
with the parts inside.
•
When carrying the robot by workers, take careful precautions to prevent
their hand or leg from being caught in the robot.
•
The work should always be performed by two (2) or more workers.
DUST- & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
!
CAUTION
– 19 –
STE 80765