Tool Air Piping - Toshiba THP550-IP Instruction Manual

4.2

Tool Air Piping

The robot is provided four (4) air lines for the tool.
The outer diameter of the air pipelines is 4 mm. Fig. 4.5 shows the tool air piping.
The air control unit (oiler, regulator with gage and filter) and solenoid valves should be
provided by the user.
The air tube is identified by the number and color. At piping, make sure that each tube
is connected properly, referring to the below-mentioned.
1 : Red 2 : White 3 : Blue 4 : Yellow
Air joint pitches of the panel
DUST- & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
4×φ4 quick-operated
joint for hand
4×φ4 air tube
Fig. 4.5 Tool air piping
Details
Wiring panel
4×φ4 quick-operated
joint for hand
– 35 –
Details
STE80783