Table of Contents
Advertisement
Monitored Printers settings
You can use the Monitored Printers utility to change the types of
printers that EPSON Status Monitor 3 will monitor. When you
install EPSON Status Monitor 3, this utility is also installed.
Usually, it is not necessary to change a setup.
1. Click Start, point to Programs, point to EPSON Printers, then
click Monitored printers.
2. Clear the check box of the printers which are not monitored.
3. Click OK to accept the setting.
Setting Up the USB Connection
The USB interface that comes with your printer complies with
Microsoft Plug and Play (PnP) USB specifications.
Note:
Only PC systems equipped with a USB connector and running
Windows Me, 98, XP, and 2000 support the USB interface.
For Windows
3
3
3
3
3
3
3
3
3
3
3
3
107
Advertisement
Table of Contents
