Table of Contents
Advertisement
Install the indicated cartridges. See "Toner Cartridge" on page
222.
Unable Clear Error
The printer cannot clear an error message because the error status
still remains. Try solving the problem again.
Worn Fuser
This message indicates that the fuser unit has reached the end of
its service life. Printing after this message appears is not
guaranteed. Turn the printer off, and reinstall the unit after it has
cooled off (30 minutes). Then replace the fuser unit with a new
one. See "Fuser unit" on page 234 for instructions.
The error clears automatically after you replace the unit and close
all printer covers.
Worn Photoconductor
This message indicates that the photoconductor unit has reached
the end of its service life. Printing after this message appears is
not guaranteed. Turn the printer off, then replace the
photoconductor unit with a new one. See "Photoconductor unit"
on page 228 for instructions. The error clears automatically after
you replace the unit and close the printer covers.
Worn TransferUnit
This message warns you that the transfer unit is near the end of
its service life. You can continue to print until the Replace
TransferUnit error message appears, but early replacement is
recommended to maintain high print quality.
To clear this warning message and continue printing, select Clear
All Warning from the control panel's Reset Menu. For instruction
about accessing the control panel menus, see "How to access the
control panel menus" on page 313.
Troubleshooting
8
8
8
8
8
8
8
8
8
8
8
8
309
Advertisement
Table of Contents
