SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON printer. EPSON is not responsible for any use of this information as applied to other printers.
1. Turn on your computer. (Make sure your printer is still on.) 2. Wait until you see the Add New Hardware Wizard. 3. Put the EPSON CD-ROM in your drive. After a moment, click Next on the Add New Hardware Wizard.
Page 4
5. When you see this screen, click Finish. Wait while the files are copied to your computer. 6. At the last screen, click Finish. 7. Go to page 10 to finish installing your software.
Then follow these steps to install your Windows 98 printer software: 1. Turn on your computer. (Make sure your printer is still on.) 2. Wait until you see this screen. Then put the EPSON CD-ROM in your drive. After a moment, click Next on the Add New Hardware Wizard.
Page 6
4. You see a screen asking where you want Windows to search. Select CD-ROM drive. Then click Next. Select CD-ROM drive . . . 5. Click Next on the next screen. 6. When you see the screen below, click Finish. then click Next...
Page 7
7. The Add New Hardware wizard identifies the EPSON Stylus C44 printer and displays the screen below. Click Next. 8. Click Next on each of the three screens that follow. 9. When you see the screen below, click Finish. Then wait while files are copied...
Then follow these steps to install your Windows 2000 printer software: 1. Turn on your computer. (Make sure your printer is still on.) 2. When you see the screen below, put the EPSON CD-ROM in your drive. After a moment, click Next.
Page 9
3. The Found New Hardware Wizard detects an unknown device and asks where you want to search for the device driver. Click Next. 4. Click Next on each of the two screens that follow. Wait while the files are copied to your computer. When you see the screen below, click Finish. 5.
ES C44 Manual icon to your desktop. 5. Click Exit to close the Options Menu. 6. When you see the EPSON Product Registration screen, register your printer as instructed. Then remove the CD-ROM. You’re ready to start printing! Follow the instructions on the Start Here sheet, or for more detailed instructions, double-click the ES C44 Manual icon on your desktop to view the printer manual.
Turn off and unplug the printer before cleaning. Clean with a damp cloth only. Do not spill liquid on the printer. Caution: Always turn the printer off by pressing the power button for two seconds. Don’t switch off the power strip, or unplug the printer until the green power light is off.
Unplug the printer and refer servicing to qualified service personnel under the following conditions: If the power cord or plug is damaged; if liquid has entered the printer; if the printer has been dropped or the case damaged; if the printer does not operate normally or exhibits a distinct change in performance.
Before transporting the printer, make sure the print head is capped in the far right position and the ink cartridges are in place. Tape the ink cartridge holder to the printer case to make sure it remains in the proper position.
Type of Product: Model: ENERGY STAR Compliance As an ENERGY STAR Partner, EPSON has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The EPA ENERGY STAR office equipment program is a voluntary partnership with the computer and office...
Epson property. The replacement printer or part may be new or refurbished to the Epson standard of quality, and, at Epson’s option, may be another model of like kind and quality. Epson’s liability for replacement of the covered printer will not exceed the original retail selling price of the covered printer.
Page 16
Epson Authorized Servicer. If a claimed defect cannot be identified or reproduced, you will be held responsible for the costs incurred.
Need help?
Do you have a question about the Stylus C44 and is the answer not in the manual?
Questions and answers