Table of Contents
Advertisement
Hard Disk Full
The optional Hard Disk Drive is full and you cannot save any
data. Delete the unnecessary data from the Hard Disk Drive. To
clear this error, select Clear Warning from the control panel's
Reset Menu. For instruction about accessing the control panel
menus, see "How to access the control panel menus" on page 313.
HDD Check
The printer is checking the Hard Disk Drive.
Image Optimum
There is insufficient memory to print the page at the specified
print quality. The printer automatically lowers the print quality
so that it can continue printing. If the quality of the printout is not
acceptable, try simplifying the page by limiting the number of
graphics or reducing the number and size of fonts.
To clear this error, select Clear Warning from the control panel's
Reset Menu. See "How to access the control panel menus" on page
313 for instructions.
Turn the Image Optimum setting off on the control panel's Printing
Menu if you do not want the printer to automatically lower the
print quality to continue printing.
You may need to increase the amount of printer memory to be
able to print at the desired print quality for your document. For
more information on adding memory, see "Memory modules" on
page 368.
Install Fuser
There is no fuser unit installed or the fuser unit is not installed
properly. Turn off the printer and install the fuser unit if it is not
installed.
300
Troubleshooting
Advertisement
Table of Contents
