Installing The Hard Disk Drive - Epson AcuLaser C4100 Reference Manual

Installing the Hard Disk Drive

Follow these steps to install the Hard Disk Drive:
Caution:
c
Before you install the Hard Disk Drive, be sure to discharge any
static electricity by touching a grounded piece of metal.
Otherwise, you may damage static-sensitive components.
Warning:
w
Be careful when working inside the printer as some components
are sharp and may cause injury.
1. Turn the printer off and unplug the power cord.
2. Remove all interface cables from the interface connectors.
3. Loosen the two screws on the back of the printer.
w
194
Installing Options
Warning:
Removing other screws and covers will expose high voltage
areas.