Table of Contents
Advertisement
If you continue to receive this message when printing a particular
page, try simplifying the page by limiting the number of graphics
or reducing the number and size of fonts.
You can also add more memory to the printer as described in
"Memory modules" on page 368.
PS3 Hard Disk full
The memory allocated for writing PostScript 3 commands on the
optional Hard Disk Drive is full.
To clear this error, select Clear Warning from the control panel's
Reset Menu, or remove the downloaded PS fonts to make room
in the HDD. For instruction about accessing the control panel
menus, see "How to access the control panel menus" on page 313.
RAM Check
The printer is ready to receive data and print.
In this mode, the remaining amount of the toner cartridge for each
color is displayed in seven levels.
Ready
The printer is ready to receive data and print.
In this mode, the remaining amount of the toner cartridge for each
color is displayed in seven levels.
Replace Photoconductor
The photoconductor has reached the end of its service life. Turn
off the printer, then replace the photoconductor unit with a new
one. See "Photoconductor unit" on page 228 for instructions.
The error clears automatically after you replace the unit and close
all printer covers. The photoconductor service life counter is reset
automatically.
306
Troubleshooting
Advertisement
Table of Contents
