Mitsubishi Electric MELSEC-Q Structured Programming Manual page 296

FXCPU Structured Programming Manual
[Device & Common]
*1. Y002 is not set in FX
*2. Note that this item can only be set if two high-speed output special adapter adapters are connected to
the FX
3U
*3. This area can be set only in FX
9
Setting the Ethernet port
The Ethernet port setting function is available in FX
FX /FX PLCs (Ver.2.00 or later).
3G 3GC
1. Click the "Ethernet Port" tab.
Set item
*1
Channel
Input Format
IP Address
IP Address
*2
Subnet Mask
Setting
Pattern
Default Router
IP Address
Communication Data Code Check the data code used for communication using the MC protocol.
Disable direct connection to
MELSOFT
Do not respond to search
for CPU on network
Open Setting
Time Setting
Log Record Setting
*1. In FX
3S
*2. IP Address Setting can be set not only by selecting "PLC Parameter" in the project view but also using
the IP address change function.
In this case, the priority is given to the setting by the IP address change function.
294
PLC (14-point and 24-point type) and FX
3G
PLC.
3U
Select whether or not the Ethernet port is connected. When it is
connected, specify the channel connected to the Ethernet port.
Select the input format and display format used to set the IP
address, subnet mask pattern and default router IP address.
Set the Ethernet port IP address.
Set the subnet mask pattern.
Set the IP address of the default router when it is used.
Check this item to disable direct connection to the MELSOFT.
Check this item not to respond to search for CPUs on the network.
This button displays the "Ethernet Port Open Setting" dialog box.
This button displays the "Ethernet Port Time Setting" dialog box.
This button displays the "Ethernet Port Log Record Setting" dialog
box.
PLC, channel is fixed to "CH1".
/FX PLCs.
3UC
/FX
3U
Contents of setting
6 Types and Setting of Parameters
6.6 Parameter setting by GX Works2
PLC.
3GC
PLCs (Ver.3.10 or later) and FX
3UC
Setting range
None, CH1, CH2
DEC, HEX
0.0.0.1 to 223.255.255.254
(Decimal)
00.00.00.01 to DF.FF.FF.FE
(Hexadecimal)
192.0.0.0 to 255.255.255.252
(Decimal)
C0.00.00.00 to FF.FF.FF.FC
(Hexadecimal)
0.0.0.1 to 223.255.255.254
(Decimal)
00.00.00.01 to DF.FF.FF.FE
(Hexadecimal)
/
3S
-
-
-
-
-
-