Mitsubishi Electric MELSEC-Q Structured Programming Manual page 288

FXCPU Structured Programming Manual
[Device & Common]
3
Setting devices
The "Device" tab is available only in FX
1. Click the "Device" tab, and set devices.
Set item
Supplemental Relay [M]
State [S]
Timer [T]
Counter (16 bits) [C]
Counter (32 bits) [C]
Data Register [D]
Extended Register [R]
4
Setting the PLC name
The "PLC Name" tab is available only in FX
FX , FX , FX
3G 3GC
1. Click the "PLC Name" tab, and input the program title.
Set item
Title
286
Set the latched (backed-up) range of auxiliary relays. Initial value: 500 to 1023
Set the latched (backed-up) range of state relays. Initial value: 500 to 999
The setting displayed here cannot be changed.
Set the latched (backed-up) range of 16-bit counters. Initial value: 100 to 199
Set the latched (backed-up) range of 32-bit counters. Initial value: 220 to 255
Set the latched (backed-up) range of data registers. Initial value: 200 to 511
All extension registers are latched (backed up).
This setting is fixed, and cannot be changed.
and FX PLCs.
3U 3UC
Input the program title in up to 32 half-width (or 16 full-width) characters.
, FX , FX , FX , FX
U 2C 2N 2NC
Contents of setting
, FX , FX , FX
0N 1S 1N
Contents of setting
6 Types and Setting of Parameters
6.6 Parameter setting by GX Works2
and FX PLCs.
3U 3UC
, FX , FX , FX , FX
1NC U 2C 2N
Setting range
Up to 32 half-width (or 16
full-width) characters
Setting range
0 to 1023
0 to 999
-
0 to 199
200 to 255
0 to 511
-
, FX ,
2NC 3S