Accessing The Ip30 From A Remote Location - Nokia IP30 User Manual

3
Configuring the IP30
2. Select Enabled.
3. Click Apply.
Accessing the IP30 from a Remote
Location
You can allow users to access IP30 from a remote location through
the Internet. To allow remote access, you must first configure
HTTPS.
Note
If your IP30 is managed from a central location, the central location must
configure HTTPS access for you.
To configure HTTPS
1. In the Navigation Bar, click Setup > HTTPS.
56
NAT is enabled.
The HTTPS Configuration page appears.
Nokia IP30 User Guide