4
VPN Configuration
Setting up SecuRemote
Define your VPN sites as IP30 Satellite to set up SecuRemote.
Refer Check Point Desktop Security Guide, VPN-1 SecuRemote
Client" for information on how to Configure SecuRemote.
IP30Tele to IP30 Satellite (VPN Client to
Gateway)
IP30 Tele functions in VPN client mode, in which connection is
initiated only by the VPN client.
IP30 Tele uses only a manual mode VPN connection. To select the
VPN gateway to which you want to establish a VPN connection, go
to http://my.vpn.
Figure 7 IP30 Tele as VPN Client
If the VPN client is enabled, the IP30 GUI Navigation Bar includes
a VPN menu option. In addition, the Reports pages includes an
additional VPN Tunnels submenu that allows you to view the
active VPN tunnels.
Note
You can use IP30 Tele only in NAT mode.
Setting up IP30 Tele
Configure a VPN Tunnel between an IP30 Tele and an IP30
Satellite.
96
Non Routable IPs
Network 1
IP30 Tele
Initiate VPN Session/ Tunnel
Non Routable IPs
Network 2
IP30 Satellite
Nokia IP30 User Guide