Table of Contents
Advertisement
The VPN Gateway Address dialog box appears.
6. Enter the IP address of the VPN gateway to which you want to
connect, as given to you by the network administrator.
7. Click Next.
Configuring a Remote Access VPN Site
If you selected Remote Access VPN, the VPN Network
Configuration dialog box appears.
1. Do one of the following:
Note
Downloading the network configuration is only possible if you are connecting
to a Check Point VPN-1 or IP30 Satellite VPN gateway.
2. Click Next.
The following things happen in the order below:
If you chose Specify Configuration, a second VPN Network
Configuration dialog box appears. Do the following:
a. In the Destination network column, enter up to three
b. In the Subnet mask column, select the subnet masks for
Nokia IP30 User Guide
To obtain the network configuration by downloading it
from the VPN site, select Download Configuration. This
option automatically configures your VPN settings by
downloading the network topology definition from the
VPN server.
To provide the network configuration manually, select
Specify Configuration.
destination network addresses at the VPN site to which
you want to connect.
the destination network addresses.
Using IP30 Tele
113
Advertisement
Table of Contents
