Sealey AP1248SS.V2 Instructions

thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
instructions
1. safety
warninG! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this bench.
‰
locate bench in a suitable working area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
warninG! use bench on level and solid ground, preferably concrete. Avoid tarmacadam since the bench may sink into the surface.
‰
Keep the bench clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the working area.
9
Do not use the bench for any purpose other than that for which it is designed.
8
Do not exceed maximum capacity of workbench.
8
Do not undertake work on the bench without the work piece being adequately secured. use clamps or a vice (not included) to secure the
8
work piece. Available from your sealey stockist.
Do not use the bench out of doors.
8
Do not get the bench wet or use in damp or wet locations or areas where there is condensation.
8
2. introDuction
i
galvanized steel frame with a 430 grade stainless steel worktop. features an adjustable bottom shelf for added storage space. maximum
capacity of 145kg on model no's AP1248ss & AP1560ss, and 170kg on model no's AP1872ss & AP2184ss. Adjustable feet for levelling the
workbench when placed on an uneven surface. Supplied flat packed.
3. sPecification
model no: ........................................................ AP1284ss.V2
size (W x d x H):...................................1200 x 760 x 890mm
Bench top capacity: ...................................................... 100kg
Bottom shelf capacity: .................................................... 45kg
model no: ........................................................ AP1560ss.V2
size (W x d x H):...................................1530 x 760 x 890mm
Bench top capacity: ...................................................... 100kg
Bottom shelf capacity: .................................................... 45kg
model no: ........................................................ AP1872ss.V2
size (W x d x H):...................................1830 x 760 x 890mm
Bench top capacity: ...................................................... 120kg
Bottom shelf capacity: .................................................... 50kg
model no: ........................................................ AP2184ss.V2
size (W x d x H):...................................2135 x 760 x 890mm
Bench top capacity: ...................................................... 120kg
Bottom shelf capacity: .................................................... 50kg
4. contents
item Description
1 table top
2 shelf
3 legs
4 socket screws
Original Language Version
© Jack sealey limited
instructions for
stainless steel workbench
model no:
Qty.
1
1
4
8
aP1248ss.V2, aP1560ss.V2, aP1872ss.V2,
aP2184ss.V2.
AP1284ss.V2, AP1560ss.V2, AP1872ss.V2, AP2184ss.V2 | issue 1 26/01/18