Sealey AP12160 Instructions

thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS 1. SAFETY INSTRUCTIONS
1.0 GENERAL SAFETY
WARNING! Ensure Health & safety, local authority, and

general workshop practice regulations are adhered to when
using this bench.
Locate bench in a suitable work area.

Keep the work area clean, uncluttered and ensure there is

adequate lighting.
WARNING! use bench on level and solid ground, preferably

concrete.
Keep the bench clean and tidy in accordance with good

workshop practice.
Keep children and unauthorised persons away from the work area.

DO NOT use the bench for any purpose other than that for

which it is designed.
DO NOT undertake work on the bench without the workpiece

being adequately secured. use clamps or a vice (not included)
to secure the workpiece - available from your sealey dealer.
DO NOT use the bench outdoors .

DO NOT get the bench wet or use in damp or wet locations or

areas where there is condensation.
DO NOT exceed the maximum load for the work surfaces,

worktop and bottom shelf - 100kg each, drawer - 20kg. Avoid
heavy impacts when placing objects onto the surfaces.
DO NOT clean the bench with any solvents which may damage

the surface or the protective coating on the worktop.
2. INTRODUCTION
2.1 Introduction:
Boltless design makes the unit easy to assemble, with minimal
tools being required. one large drawer with ball bearing slides,
fitted with two handles. MDf Worktop measures 1210 x 605mm
(W x D), which has a comfortable work height of 900mm. fitted
with anti-slip foot protectors.
2.2 Dimensions:
size (W x D x H ):1210 x 605 x 900mm
Worktop: 1210 x 605mm.
Max capacity (per level): 100kg evenly distributed.
Max capacity of drawer: 20kg evenly distributed.
3. CONTENTS
unpack the product and check the contents against the list/
drawing on the right. should any items be missing or damaged
contact your sealey dealer.
4. METHOD OF CONSTRUCTION
structural members have
flat headed, waisted
rivets attached which
pass through keyholes in
the uprights and are
pushed down to secure
them.
© Jack sealey Limited
InstructIons for:
WORKBENCH 1.2 METRE WITH DRAWER
MoDEL no
Original Language Version
AP12160
:
Ap12160 Issue no.1 21/06/12