Sealey AP12600.V4 Instructions

thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS 1. SAFETY INSTRUCTIONS
1.0 GENERAL SAFETY
WARNING! Ensure Health & safety, local authority, and

general workshop practice regulations are adhered to when
using this bench.
Locate bench in a suitable work area.

Keep the work area clean, uncluttered and ensure there is

adequate lighting.
WARNING! use bench on level and solid ground, preferably

concrete.
Keep the bench clean and tidy in accordance with good

workshop practice.
Keep children and unauthorised persons away from the work area.

DO NOT use the bench for any purpose other than that for

which it is designed.
DO NOT undertake work on the bench without the workpiece

being adequately secured. use clamps or a vice (not included)
to secure the workpiece - available from your sealey dealer.
DO NOT use the bench outdoors .

DO NOT get the bench wet or use in damp or wet locations or

areas where there is condensation.
DO NOT exceed the maximum load for the work surfaces,

worktop and bottom shelf - 100kg each, top shelf - 20kg. Avoid
heavy impacts when placing objects onto the surfaces.
DO NOT clean the bench with any solvents which may damage

the surface or the protective coating on the worktop.
2. INTRODUCTION
2.1 Introduction:
Boltless design makes the unit easy to assemble, with minimal
tools being required. pegboard rear panel with hooks for
convenient tool storage. two half drawers, with ball bearing
slides, full size shelf below worktop and 230mm shelf above
pegboard.
2.2 Dimensions:
size (W x D x H [overall/Worktop]):1215 x 610 x 1500/900mm
Worktop: 1205 x 600mm
InstructIons for:
1.2 METRE WORKBENCH WITH DRAWERS
MoDEL no
3. CONTENTS
unpack the product and check the contents against the list below.
should any items be missing or damaged contact your sealey dealer.
ITEM PART NO.
A Ap12600.V3-A
B(L) Ap12600.V3-BL
B(R) Ap12600.V3-Br
C Ap12600.V3-c
D Ap12600.V3-D
E Ap12600.V3-E
E1 Ap12600.V3-E1
F Ap12600.V3-f
G Ap12600.V3-G
H(L) Ap12600.V3-HL
H(R) Ap12600.V3-Hr
I(L) Ap12600.V3-IL
I(R) Ap12600.V3-Ir
J Ap12600.V3-J
K Ap12600.V3-K
L(L) Ap12600.V3-LL
L(R) Ap12600.V3-Lr
N(L) Ap12600.V3-nL
N(R) Ap12600.V3-nr
O(L) Ap12600.V3-oL
O(R) Ap12600.V3-or
P Ap12600.V3-p
Q Ap12600.V3-Q
R Ap12600.V3-r
S Ap12600.V3-s
T Ap12600.V3-t
U Ap12600.V3-u
V Ap12600.V3-V
W Ap12600.V3-W
X Ap12600.V3-XH
Y Ap12600.V4-Y
4. METHOD OF CONSTRUCTION
structural members have
flat headed, waisted
rivets attached which
pass through keyholes in
the uprights and are
pushed down to secure
them.
Original Language Version
AP12600.V4
:
DESCRIPTION
LEft (rIGHt) front post (900MM)
LEft rEAr post (966MM)
rIGHt rEAr post (966MM)
fEEt
sIDE BEAMs (592MM)
BottoM BEAMs (1200MM)
BottoM top (1197MM)
front & rEAr sHELf BEAM (1200MM)
DrAW Mounts front/rEAr (135MM)
DrAW Mounts, LEft (605MM)
DrAW Mounts, rIGHt (605MM)
DrAW Mounts, cEntrE LEft (586MM)
DrAW Mounts, cEntrE rIGHt (586MM)
front pAnEL for DrAW (530MM)
rEAr pAnEL for DrAW (510MM)
LEft sIDE pAnEL for DrAW (455MM)
rIGHt sIDE pAnEL for DrAW (455MM)
LEft EXtEnsIon post (610MM)
rIGHt EXtEnsIon post (610MM)
LEft top sHELf BEAMs (230MM)
rIGHt top sHELf BEAMs (230MM)
BottoM sHELf (1210 x 605 x 15MM)
WorKtop (1210 x 603 x 15MM)
pEGBoArD (1210 x 580 x 4.5MM)
top sHELf (1205 x 228 x 6.0MM)
DrAW BottoM (512 x 450 x 6MM)
DrAW HAnDLE
M4 x 10MM - Draw handle bolts (8pcs), nuts (8pcs), washers (8pcs)
M6 x 15MM - Fixing kit bolts (8pcs), nuts (8pcs), washers (12pcs)
Toolhook
M6 x 10MM - Draw bolts (16pcs), nuts (16pcs), washers (16pcs)
Ap12600.V4 Issue no.1 03/09/10
QTY
2
1
1
4
4
2
2
2
2
1
1
1
1
2
2
2
2
1
1
1
1
1
1
1
1
2
2
24
28
20
48