Download Print this page

Sealey AP1210 Instructions

Steel workbenches with wooden top

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear protective
instructions
gloves
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this bench.
Locate bench in a suitable working area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep the bench clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the working area.
9
DO NOT use the bench for any purpose other than that for which it is designed.
8
DO NOT use in damp work areas.
8
DO NOT undertake work on the bench without the workpiece being adequately secured. Use clamps or a vice (not included) to secure the
8
workpiece. Available from your Sealey dealer.
WARNING! The warnings, cautions and instructions referred to in this instruction manual cannot cover all possible conditions and situations
that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied
by the operator.
2. INTRODUCTION
Fully painted steel frame with wooden worktop and shelf. No nuts and bolts, means no tools required to assemble. Workbench clips
together in minutes. Available in two sizes.
3. SPECIFICATION
Model No:
Overall Size (W x D x H):
Maximum Capacity / Shelf:
4. CONTENTS
© Jack Sealey Limited
STEEL WORKBENCHES WITH WOODEN TOP
MODEL NO:
Wear safety
footwear
AP1210
1210 x 610 x 900mm
100kg
Original Language Version
AP1210 & AP1535
AP1535
1535 x 620 x 920mm
200kg
Item
Description
1
Support Rack
2
Cross Rail (Short)
3
Cross Rail (Long)
4
Feet
5
Wooden Top
(1.2 M, 1.53 M)
AP1210
AP1210.01
AP1535.01
AP1210.02
AP1535.02
AP1210.03
AP1535.03
AP1210.04
AP1535.04
AP1210.05
AP1535.05
AP1210, AP1535 Issue 2 (F,5) 11/09/20
AP1535

Advertisement

loading

Summary of Contents for Sealey AP1210

  • Page 1 (1.2 M, 1.53 M) MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...

This manual is also suitable for:

Ap1535