Sealey AP165WB Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE
KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
1.1 GENERAL SAFETY
 WARNING! Ensure Health & Safety, local authority, and general workshop practice
regulations are adhered to when using this workbench.
 WARNING! Use caution when handling and assembling the metal components. The
metal may have sharp edges or corners, the use of protective gloves is recommended.
 Locate workbench in a suitable working area.
 Keep the work area clean, uncluttered and ensure there is adequate lighting.
 Keep the workbench clean and tidy in accordance with good workshop practice.
 Keep children and unauthorised persons away from the working area.
 DO NOT climb, step or stand on the workbench.
 DO NOT use the workbench for any purpose other than that for which it is designed.
 DO NOT use in damp work areas.
 WARNING! The warnings, cautions and instructions referred to in this instruction
manual cannot cover all possible conditions and situations that may occur. It must be
understood that common sense and caution are factors which cannot be built into this
product, but must be applied by the operator.
2. INTRODUCTION
Use as part of a complete professional garage storage system or an individual workbench. Featuring wooden worktop, six legs fitted with adjustable
feet for levelling on uneven floors. All steel construction with a graphite powder coat finish.
Overall Size (W x D x H):
Contents Qty
1 Leg Assembly 3
2 Short Cross Bar 2
3 Long Cross Bar 2
4 Bench Top 1
5 Adjustable Foot 6
6 Machine Screw 36
7 Flange Nut 36
8 Self Tapping Screw 8
1650 x 509 x 945mm
INSTRUCTIONS FOR:
STEEL WORKBENCH 1650mm
AP165WB
MODEL No:
Fig.1
AP165WB Issue No: 1 - 09/10/08