Advertisement
4. ASSEMBLY
4.1.
Place the bench top (fig.1.1) upside on the floor. Use a floor covering to protect the
bench top.
4.2.
Fasten the four support brackets (fig.1.3) to the leg frames using the fixings
provided (fig.2).
4.3.
Fasten the leg/bracket assemblies to the channels welded to the underside of the bench
top (fig.3).
4.4.
Fasten the four castor brackets (fig.1.4) to the legs.
4.5.
Fasten the two locking castors (fig.1.5) to the legs at one end.
4.6.
Fasten the two fixed castors (fig.1.6) to the legs at the other end.
4.7.
Fasten the shelf (fig.1.8) to the crossmembers of the leg frames.
4.8.
Using two people, turn the bench right way up.
4.9.
Fix the handle (fig.1.7) to the end of the bench to which the locking castors are fitted.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable dispose of it according to local regulations.
NOTE: It is our policy to improve products continually and as such we reserve the right to alter data, specifications and component parts without
prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack Sealey Limited
Environmental Protection
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
Key:
1: Bench Top
2 Leg Frames (x2)
3: Support Brackets (x4)
4: Castor Brackets (x4)
5: Locking Castors (x2)
6: Fixed castors (x2)
7: Handle
8: Shelf
fig.2
fig.1
fig.3
01284 757500
01284 703534
www.sealey.co.uk
sales@sealey.co.uk
AP1100M Issue: 1 - 05/11/15
Advertisement
