Sealey AP1100M Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions
and maintained properly, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
 WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this bench.
 Locate bench in a suitable working area.
 Keep the work area clean, uncluttered and ensure there is adequate lighting.
 WARNING! Use bench on level and solid ground, preferably concrete. Avoid tarmacadam since the bench may sink into the surface.
 Always apply the brakes to the locking castors before using the bench.
 Keep the bench clean and tidy in accordance with good workshop practice.
 Keep children and unauthorised persons away from the working area.
 DO NOT place heavy loads on the lower shelf.
 DO NOT use the bench for any purpose other than that for which it is designed.
 DO NOT carry out any work on the bench without the workpiece being adequately secured. Use clamps or a vice (not included) to secure
the workpiece (available from your Sealey dealer).
 DO NOT use the bench outside.
 DO NOT get the bench wet, or use in damp or wet locations or areas where there is condensation.
 DO NOT clean the bench with any solvents which may damage the paint surface.
WARNING! This workbench is heavy and assistance should be obtained before assembly.

2. INTRODUCTION
Sturdy steel construction workbench with a capacity of 300kg. Two shelves that allow unobstructed access. Fitted with two fixed castors, two
locking castors and a heavy-duty handle.
3. SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AP1100M
Size incl. Handle (W x D x H): . . . . . . . . . . . . . . . . . . . . . . .1180 x 700 x 830mm
Work Surface (W x D): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1100 x 700mm
Capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300kg
© Jack Sealey Limited
INSTRUCTIONS FOR:
MOBILE WORKBENCH 2-LEVEL
AP1100M
MODEL NO:
Original Language Version
AP1100M Issue: 1 - 05/11/15