Figure 5-7 Connecting The Agx105F Door Status Sensor; Figure 5-8 Connecting The Ho-03A Door Status Sensor - Huawei EMU User Manual

EMU
User Guide
Context
Procedure
Step 1 Mark the installation position of the door status sensor.
Step 2 Use the percussion drill to drill holes according to the marks.
Step 3 Install and fasten the door status sensor.
Step 4 Connect the door status sensor, as shown in

Figure 5-7 Connecting the AGX105F door status sensor

Figure 5-8 Connecting the HO-03A door status sensor

Issue 13 (2009-12-30)
NOTE
The distance between the two fingers should be less than 5 mm [0.20 in.] when the door is closed.
l
The door status sensor can be connected only to the terminals marked "GATE&12VG".
l
The alarms reported by the door status sensor can be cleared only through human intervention.
l
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-7 and Figure
5 Installing the Sensors
5-8.
5-9