Installing The Water Sensor; Figure 5-2 Installing The Water Sensor - Huawei EMU User Manual

EMU
User Guide

5.1 Installing the Water Sensor

This describes how to install the water sensor.
Context
l
l
l
Procedure
Step 1 Erect the water sensor in the selected installation position, as shown in

Figure 5-2 Installing the water sensor

Step 2 Install the leading cable of the sensor.
Issue 13 (2009-12-30)
CAUTION
The sensor probe must be protected from liquid chloride.
The monitored plane must not be reflective.
The water sensor can be connected only to the terminals marked "Water", "12VW", and
"GND".
Placing
surface
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Installing the Sensors
Figure 5-2.
5-3