Monitoring Port For The Relay Node Boolean Signals; Figure 2-15 Connecting The Analog Sensor Of The Voltage Type; Figure 2-16 Connecting The Analog Sensor Of The Current Type - Huawei EMU User Manual

EMU
User Guide
The voltage-type analog sensor has two power input terminals (marked "POWER+" and
"POWER-") and one analog signal output terminal (marked "Sout"), as shown in

Figure 2-15 Connecting the analog sensor of the voltage type

Analog Sensor of the Current Type
The analog sensor of the current type has two power input ends (marked "POWER+" and
"POWER-"), as shown in

Figure 2-16 Connecting the analog sensor of the current type

2.5.8 Monitoring Port for the Relay Node Boolean Signals

This describes the monitoring port for the Boolean Sensor. The EMU supports six monitoring
ports for relay node Boolean signals, and the monitoring port for relay node Boolean signals is
suitable for a bare terminal of a cable (24 AWG - 12 AWG).
Issue 13 (2009-12-30)
POWER +
Analog
Sout
signal
sensor
POWER -
i = 1, 2, 3, 4
Figure
POWER +
Analog
signal
POWER -
sensor
i = 1, 2, 3, 4
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
24V i
12V i
ANA i
GND
2-16.
24V i
12V i
ANA i
2 Overview of the EMU
Figure 2-15.
2-17