5 Installing the Sensors
Procedure
Step 1 Remove the installation sheet of the infrared sensor, and then mark on the wall the positions of
the two installation holes of the installation sheet.
Step 2 Use the percussion drill to drill holes according to the marks.
Step 3 Insert the expansion tubes into the installation holes.
Step 4 Use the tapping screws to fix the installation sheet to the wall.
Step 5 Fix the infrared sensor to the installation sheet.
Step 6 Connect the infrared sensor, as shown in
Figure 5-6 Connecting the infrared sensor
----End
5.4 Installing the Door Status Sensor
This describes how to install the door status sensor.
5-8
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
5-6.
EMU
User Guide
Issue 13 (2009-12-30)