Monitoring Port For The Door Status Sensor; Monitoring Port For The Humidity/Temperature Sensor; Figure 2-11 Monitoring Port For The Door Status Sensor; Table 2-7 Meanings Of The Terminals Of The Monitoring Port For The Door Status Sensor - Huawei EMU User Manual

EMU
User Guide

2.5.4 Monitoring Port for the Door Status Sensor

This describes the monitoring port for the door status sensor. This port is a dry contact point
Boolean signal monitoring port and suitable for a bare terminal of a cable (24 AWG - 12 AWG).
For the position of the monitoring port for the door status sensor, see
EMU.

Figure 2-11 Monitoring port for the door status sensor

Table 2-7

Table 2-7 Meanings of the terminals of the monitoring port for the door status sensor

Silkscreen
12VG
Gate

2.5.5 Monitoring Port for the Humidity/Temperature Sensor

This describes the monitoring port for the humidity/temperature sensor. This port is a current-
type analog signal monitoring port and suitable for a bare terminal of a cable (24 AWG - 12
AWG).
For the position of the monitoring port for the humidity/temperature sensor, see
the
Issue 13 (2009-12-30)
Figure 2-11 shows this port.
lists the meanings of the terminals of the monitoring port for the door status sensor.
NOTE
You can set bit 4 of the DIP switch SW_BKE to choose whether to use the monitoring port for the door
status sensor. For details, see
EMU. Figure 2-12 shows this port.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Meaning
Positive input terminal for door status
monitoring signals
Negative input terminal for door status
monitoring signals
2.3 Internal Structure of the
2 Overview of the EMU
2.2 Exterior of the
EMU.
2.2 Exterior of
2-13