Huawei ECC500 User Manual page 59

ECC500
User Manual
Step 3 Set User Name and Password, and click Log In. The WebUI login page is displayed, as
shown in
Figure 5-7 ECC500 WebUI login page
Step 4 Choose Home > Equipment Manage.
Step 5 Select UPS2000G from the Equipment Type drop-down list box and set device parameters,
as shown in
Figure 5-8 Adding a UPS2000G
The setting example indicates that the UPS2000G is connected to the COM2 port of the
RS485 card in slot 3 of the ECC500. If the UPS2000G is connected to another port, set the
slot number for the connected port.
Table 5-2 UPS2000G parameters
Parameter
Communication Board Slot
Communication Board COM
Issue 03 (2020-01-06)
Figure 5-7.
Figure 5-8. Table 5-2
Copyright © Huawei Technologies Co., Ltd.
describes the setting methods.
Setting
Select 3 from the drop-down list box.
Select 2 from the drop-down list box.
5 UI Description
52