How Can I Change The Ups2000G Name And T/H Sensor Name - Huawei ECC500 User Manual

ECC500
User Manual
7.12 How Can I Change the UPS2000G Name and T/H
Sensor Name?
Prerequisites



Context
After the name of the UPS2000G or T/H sensor is changed, an alarm reported by the device
will contain the new device name. Using the device name, maintenance engineers can easily
locate the fault.
Procedure
Step 1 Log in to the ECC500 WebUI.
Step 2 Change the UPS2000G name.
1.
2.
Step 3 Change the T/H sensor name.
1.
Issue 03 (2020-01-06)
The T/H sensor and UPS2000G have been added to the ECC500.
You have obtained the ECC500 IP address as well as the user name and password for
WebUI login.
You have prepared a PC which is in the same IP address segment as the ECC500 and
connected the PC to the ECC500 over a switch.
Choose Monitoring > UPS2000 Group > UPS2000G-B32001 > Running Parameter
B32001 in UPS2000G-B32001 is variable and subject to change with the model, connected collector
port, and device address of the UPS2000G. The displayed value prevails.
Set Name and click Submit, as shown in
Figure 7-13 Changing the UPS2000G name
Choose Monitoring > Temp/Hum Group > Temp/Hum35001 > Running Parameter.
Copyright © Huawei Technologies Co., Ltd.
Figure 7-13.
7 FAQ
98