GE Vivid T8 Basic Service Manual page 284

Replacement Procedures
8-4-7-1 Loading the System Software with USB memory stick(continued)
WARNING
NOTE:
WARNING
NOTE:
WARNING
8-26
While the software install procedure is designed to
preserve data, you should select choice [b] to format disk
C only.
If selected to load C Disk only when loading the system
software, the system will display a screen to restore
Computer name before entering the scanning screen.
9. If Load The Complete Disk is selected, a confirmation
page is displayed, then select Execute to continue.
Figure 8-14. Data Backup Confirmation
Please make sure the system configuration have been
backed up first, then upgrade the system.
10. System USB memory stick will be loading. Wait for the
software installation to complete. Status bar on the screen
indicates the progress.
It will need about 27 minutes to finish the upgrading
process.
Do not interrupt the software loading at any time..
Vivid T9/Vivid T8 – Basic Service Manual
5795591-100 English Rev. 3