GE Vivid T8 Basic Service Manual page 191

4-3-26-4 ECG Check
Step
1 Connect the ECG harness to the connector
under the control panel.
2 Connect the three leads to an ECG simulator,
or
Fasten the three ECG Pads to your body and
connect the three leads to respective ECG
Pad.
Vivid T9/Vivid T8 – Basic Service Manual
5795591-100 English Rev. 3
Table 4-2: ECG Checks
Task
Functional checks
Expected Result(s)
The unit displays a straight curve along the
bottom edge of the image sector on the screen.
When connecting, the signal on the screen will
be noisy.
When the connection is completed, a typical
clean ECG signal is displayed.
4-33