GE Vivid T8 Basic Service Manual page 108

System Setup
3-8-3-1-4 Installation Procedure
3-28
(continued)
5. Press F2 (Config) on the Control Panel.
6. Select Connectivity-> Additional Outputs, select the
appropriate print key (Print1 or Print2) from the Button
section.
Figure 3-6. Connectivity->Additional Outputs
7. If Printer is not in the selected Devices menu, select it from
the Available Devices in the left column and press ">>" to
move to the selected Devices column.
8. A window will pop up.
Figure 3-7. Standard printer properties
9. Select Sony UP 898 Series from the Name pull-down menu,
then select OK.
Vivid T9/Vivid T8 – Basic Service Manual
5795591-100 English Rev. 3