4.
Click the [OK] button to add the module labels of the RJ71PN93.
5.
Set the items in "Basic Setting" as follows.
[Navigation window] [Parameter] [Module Information] [RJ71PN93] [Basic Setting]
6.
In "Refresh Setting", set "Target" to "Device", and set devices to be refreshed as follows.
[Navigation window] [Parameter] [Module Information] [RJ71PN93] [Refresh Setting]
7.
Write the set parameters to the CPU module, and reset the CPU module or power off and on the system.
[Online] [Write to PLC]
In the program example, default settings are used for parameters other than the above. For details on
parameters, refer to the following.
MELSEC iQ-R PROFINET IO Device Module User's Manual (Application)
7 COMMUNICATION EXAMPLE
7.1 Example of I/O Data Exchanges
7
35