Panasonic LP-GS Series Serial Communication Command Manual page 91

Data length
Name Omit
[byte]
Start
Y Max. 9*
period
End
Y Max. 9*
period
Lot
– Max. 18
character
Total data length Max. 44
* Setting request data are variable length.
Reference
• Refer to "2-3-6 Character data input method" (P.38) for details on the character input method and character types with
input restrictions.
• For response data for readout, the characters input with the one-byte characters are read out in ASCII code. The
characters input with the two-byte characters are read out in the character code, Shift JIS code or GB 2312 code,
selected in the system settings. If any characters which belong to the non-supported character code are in the data, the
readout request cannot be accepted.
• When the lot unit of the lot settings (LTC command) is changed, the lot period (start/end periods) and lot character (LTS
command) settings registered to that lot number are deleted.
⿎ Example of command settings
Condition: Lot unit = Year and month
Lot No. = 0, Period No. = 1, Start period = January 2014, End period = December 2014,
Lot character = abcd
• Setting
Transmission data
• Readout
Transmission data
Response data
Data contents
Lot unit
Year, Year (week-
"000001980"–"000002099"
based)
Month "000000001"–"000000012"
Date "000000001"–"000000031"
Year and month
"000198001"–"000209912"
(000YYYYMM)
Month and date
"000000101"–"000001231"
(00000MMDD)
Sun.
Day of week
Mon.
Tue.
Wed.
Thur.
Fri.
Sat.
Hour "000000000"–"000000023"
Week "000000001"–"000000054"
Minute "000000000"–"000000059"
Hour and minute
"000000000"–"000002359"
(00000HHmm)
Counter "000000000"–"999999999"
The number of input characters allowed: Max. 9
characters
It is the length including the separator ",".
[STX] LTS S
[STX] LTS R
[STX] LTS A
ME-LPGS-SR-5
Setting range
• It is the range of periods to
• The setting range varies by
• Set "?????????" with the
• If the period is not set at the
"000000000"
"000000001"
"000000002"
• To delete the period, end the
"000000003"
"000000004"
"000000005"
"000000006"
• The period that the end
Specify 0-byte for data length to
delete characters.
0,1,201401,201412,abcd
0,1 [CR]
00,01,000201401,000201412,abcd
Remarks
mark the same lot characters.
lot unit.
start/end periods to delete it.
time of readout, "?????????"
is returned.
data here. It is not necessary
to transmit the subsequent
data including a separator ",".
period comes before the start
period cannot be set.
[CR]
[CR]
91