Table of Contents
Advertisement
Note:
Position the longer end of the blade away
from the machine.
3.
Secure the chain to the blade mounting
assembly with a bolt (3/8 x 1-1/4 inches) and a
flange nut (3/8 inch)
4.
Secure the other end of the chain to the slot in
the frame with the snap link
Note:
There should be some slack in the chain
when connected.
1. Bolt (7/16 x 3-3/4 inches)
2. Small washer (1/2 inch)
3. Machine frame
4. Large washer
5. Blade-mount assembly
6. Locknut (7/16 inch)
7. Bolt (7/16 x 3-1/4 inches)
(Figure
16).
(Figure
16).
5.
Grease the fitting on the blade mounting
assembly and on the windrow blade hub with
No. 2 lithium grease.
Note:
When the windrow is not required,
unhook the chain from the snap link, pivot the
windrow assembly upward, and hook the chain
at the raised level.
Figure 16
8. Windrow blade
9. Spacer
10. Bolt (3/8 x 1-1/4 inches)
11. Chain
12. Flange nut (3/8 inch)
13. Snap link
16
g030462
Advertisement
Table of Contents
