Toro Pro Sweep 07068 Operator's Manual page 10

3
Installing the Hitch Tongue
Parts needed for this procedure:
1 Hitch tongue
1 Hitch pin
1 Bolt (3/8 x 1-1/4 inch)
1 Nut (3/8-16)
1 Large washer
1 Large nut
Procedure
Note:
This procedure requires 2 people.
1. Hitch tongue
2. Hitch pin
3. Bolt (3/8 x 1-1/4 inch) and locknut (3/8 inch)
1. Insert the rear end of the hitch tongue between
the mounting plates on the machine while
aligning the mounting holes
Note:
Position the hose guides on top of the
hitch tongue.
2. Insert the hitch pin through the mounting plates
and the hitch tongue
3. Secure the top of the hitch pin to the mounting
plate with a bolt (3/8 x 1-1/4 inch) and a locknut
(3/8 inch) as shown in
4. Secure the bottom of the hitch pin with a large
washer and a large nut
Figure 3
4. Large nut
5. Large washer
10
(Figure 3).
(Figure 3).
Figure 3.
(Figure 3).
g011255