Figure 5-23 Network Parameter Read; Table 5-5 Network Parameter Information - Hitachi FL.NET User Manual

5 USER GUIDE
Network parameter read
This function reads a remote node's network parameter information from the network.
The table 5-5 lists the items of information that this function reads. For use instructions,
see "5.3 Using the FL.NET Module."
Request message
Response message

Table 5-5 Network Parameter Information

Node number
Vendor name
Maker form
Node name (equipment name)
Common memory address and size
Token surveillance timeout
Refresh cycle time
Measured refresh cycle time (measured value)
Minimum frame interval
Higher layer status
FL-net status
Protocol version

Figure 5-23 Network Parameter Read

Node number
Maker form
Maker form
Node name (equipment name)
Starting address of area 1
Size of area 1
Starting address of area 2
Size of area 2
Token surveillance timeout
Minimum permissible frame interval
Higher layer status
FL-net status
Protocol version
Refresh cycle time (RCT) setting
Refresh measurement cycle time (current)
Refresh measurement cycle time (maximum)
Refresh measurement cycle time (minimum)
Network parameters
5-22