Hitachi FL.NET User Manual page 9

2. Hazard Warning Statements
The following are the hazard warning statements contained in this manual.
2.1 CAUTION Statement
(chapter 6, page 6-2)
Before replacing the module, switch it off to avoid electrical shock hazards and
also to prevent it from being damaged or malfunctioning.
2.2 NOTICE Statements
(chapter 1, page 1-5)
Users of this product must have an adequate knowledge of the Windows®
environment and user interface. This system conforms to the Windows®
standard, and this manual is prepared for those users who are familiar with the
basic Windows® operating procedures.
(chapter 2, page 2-8)
Switch off the power supply before operating the MAIN/SUB setting switch. If
you operate while the power supply is applied, it may result in a malfunction.
(chapter 3, page 3-2)
There are no specific rules about the mounting position or unoccupied slots.
This model-LQE702 FL.NET module may not be mounted on the same mount
base in conjunction with any other FL.NET module of models LQE500 or
LQE502 and any EQ.LINK module of model LQE701.
CAUTION
NOTICE
NOTICE
NOTICE
S-6