Sending Setups - Hitachi FL.NET User Manual

5 USER GUIDE
(3) The [Save As] window is displayed. Enter the file name.
If a comment is required, enter it in the file comment field.
(Maximum number of input characters: 128 characters)
To change the PCs number, enter it in the PCs number field. (Maximum number of input
characters: 4-digit number)
(4) After completing the setup, click the
Cancel button.
The areas to be saved are self-node setup, PCs allocation of all nodes, IP address, and
subnet mask.

5.5.9 Sending setups

Function: Load the self-node setup, PCs allocation of all nodes, and IP address and subnet mask
of the FL.NET module, which were saves on the PC by the saving function, onto the
PCs.
For using this function, it is a prerequisite that the PCs is connected with the PC by cable.
Operation: The procedure is shown below.
(1) Select [Main] or [Sub] from the [Module] menu of the [[S10V] FL.NET] window.
Save button. To cancel the setup, click the
5-132