Hitachi FL.NET User Manual page 21

Option for s10v
Hide thumbs Also See for FL.NET:
Table of Contents

Advertisement

To determine whether device versions are compatible, see below.
Other device
Ver. 1.00 device
Ver. 2.00 device
√: Connectable, nc: Not connectable
Ver. 1.00: FL-net protocol version of the device manufactured on the standard of the FA Control
Network [FL-net (OPCN-2)] - Protocol Specification JEM 1479 2000-edition issued by
Japan Electrical Manufacturers' Association (JEMA)
Ver. 2.00: FL-net protocol version of the device manufactured on the standard of the FA Control
Network [FL-net (OPCN-2)] - Protocol Specification JEM 1479 2002-revision issued
by Japan Electrical Manufacturers' Association (JEMA)
The existing parameter setting software (FL.NET system) shown in the following table can be
used for LQE702 regardless of the FL-net protocol version.
Name
FL.NET system for S10V
<Trademarks>
• Microsoft® Windows® operating system, Microsoft® Windows® 2000 operating system,
Microsoft® Windows® XP operating system, Microsoft® Windows® 7 (32-bit) operating
system are registered trademarks of Microsoft Corporation in the United States and/or other
countries.
• Ethernet® is registered trademark of Xerox, Corp.
Self-device
Ver. 1.00 device
Model
S-7895-30J
Ver. 2.00 device
nc
For LQE500, LQE502, and LQE702
ii
nc
Remarks

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Lqe702Lqe702-z

Table of Contents