Mitsubishi Electric MELSEC iQ-R Series User Manual page 140

Conversion enable/disable setting [Q compatible mode]
Set whether to enable or disable the temperature conversion with the Q compatible mode function used.
b15 b14 b13 b12 b11 b10 b9
0 0 0 0 0
(2)
(1) 0: Conversion enable, 1: Conversion disable
(2) The values of b8 to b15 are fixed to 0.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
Conversion enable/disable setting (in Q
compatible mode)
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9) to enable the setting.
■Default value
The default value is Conversion disable (1) for all the channels.
CH1 Averaging process specification
Select processing to be performed among the sampling processing, averaging processing, and filter processing.
Averaging processing consists of time average, count average, and moving average.
Setting value
0
1
2
3
4
Setting a value other than the above causes an averaging process specification setting range error (error code: 191H).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Averaging process specification
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9) to enable the setting.
■Default value
The default value is Sampling processing (0) for all the channels.
APPX
138
Appendix 3 Buffer Memory Areas
b8 b7 b6 b5 b4
0 0 0 CH8 CH7 CH6 CH5
CH1
0
CH1
501
b3 b2 b1 b0
CH4 CH3 CH2 CH1
(1)
CH2 CH3 CH4
Setting content
Sampling processing
Time average
Count average
Moving average
Primary delay filter
CH2 CH3 CH4
701 901 1101
CH5 CH6 CH7
CH5 CH6 CH7
1301 1501 1701
CH8
CH8
1901